Difference between revisions of "LaserBox/Mux Board"

From Hackstrich
 
(One intermediate revision by the same user not shown)
Line 2: Line 2:
  
 
== Project Status ==
 
== Project Status ==
 +
* 2017-04: All works as designed with the exception of the issues noted below, which have been worked around.
 
* 2017-03-18: Boards arrived, built the first one and so far seems to be working with no issues. Have only tested with LEDs, once lasers are tested I'll call this complete.
 
* 2017-03-18: Boards arrived, built the first one and so far seems to be working with no issues. Have only tested with LEDs, once lasers are tested I'll call this complete.
 
* 2017-03-03: Completed checklisting, board sent to OSH Park w/ expedited shipping option, should have them a couple weeks.
 
* 2017-03-03: Completed checklisting, board sent to OSH Park w/ expedited shipping option, should have them a couple weeks.
Line 10: Line 11:
  
 
== Rev001 Issues ==
 
== Rev001 Issues ==
 +
* Bypass capacitors missing from BOM
 
* Connectors provide a GND pin for each I/O pin, but the I/Os are sinks! Need +5V and I/O really.
 
* Connectors provide a GND pin for each I/O pin, but the I/Os are sinks! Need +5V and I/O really.
 
** Too late to re-spin the board, the connectors do provide one +5V pin so I'll have to work around the bug with creative cable building.
 
** Too late to re-spin the board, the connectors do provide one +5V pin so I'll have to work around the bug with creative cable building.
  
[[Category:Current Projects]]
+
[[Category:Completed Projects]]

Latest revision as of 14:06, 13 November 2017

The LaserBox Mux Board controls 36 lasers off three I/O pins, using shift registers. It has 6 separate channel connectors, each with 8 output pins on it.

Project Status

  • 2017-04: All works as designed with the exception of the issues noted below, which have been worked around.
  • 2017-03-18: Boards arrived, built the first one and so far seems to be working with no issues. Have only tested with LEDs, once lasers are tested I'll call this complete.
  • 2017-03-03: Completed checklisting, board sent to OSH Park w/ expedited shipping option, should have them a couple weeks.
  • 2017-02-28: Submission accepted, will do final review of board and get it sent off for ASAP manufacturing tonight or tomorrow.
  • 2017-01-30: Completed schematic/BOM/board layout.
  • 2017-01-29: Have been working on schematic and board, schematic/BOM are done, board is 95% done routing.
  • 2017-01-21: Started putting together electronics design.

Rev001 Issues

  • Bypass capacitors missing from BOM
  • Connectors provide a GND pin for each I/O pin, but the I/Os are sinks! Need +5V and I/O really.
    • Too late to re-spin the board, the connectors do provide one +5V pin so I'll have to work around the bug with creative cable building.