Difference between revisions of "Beacon4"

From Hackstrich
(Adding/removing ? from dimensions which are confirmed/not confirmed.)
(Adding cost info/tracking.)
Line 1: Line 1:
−
Beacon4 will be the fourth incarnation of the flagpole beacon (after [[Beacon2]] and [[Beacon3]]), for Burning Man 2012. This year the plan is to take a different approach, and light the entire scaffold tower rather than just a beacon on top of the flagpole.
+
Beacon4 will be the fourth incarnation of the flagpole beacon (after [[Beacon2]] and [[Beacon3]]), for Burning Man 2012. This year the plan is to take a different approach, and light the entire scaffold tower rather than just a beacon on top of the flagpole.  
  
−
= Project Status =
+
= Project Status =
−
* 2012-06-07: Work on [[StrichLux]] continues.  Evaluated lots of software, Lightjams is looking the best at this point, though would require Windows.
 
−
* 2012-05-27: Completed rev. 1 [[StrichLux]] system design of all modules required for this project and sent all boards off for manufacturing.
 
−
* 2012-04-30: Started planning the power architecture for the project.
 
−
* 2012-04-29: Work continuing on [[StrichLux/IO-DMX|IO-DMX]] module.
 
−
* 2012-04-24: Permission received!
 
−
* 2012-04-23: Requested permission from NeonBunny to attach LEDs to the tower.
 
−
* 2012-04-22: Started putting together idea.
 
  
−
= Outstanding Issues =
+
*2012-06-07: Work on [[StrichLux]] continues. Evaluated lots of software, Lightjams is looking the best at this point, though would require Windows.
−
* Software evaluation:
+
*2012-05-27: Completed rev. 1 [[StrichLux]] system design of all modules required for this project and sent all boards off for manufacturing.
−
** QLC
+
*2012-04-30: Started planning the power architecture for the project.
−
*** Max of only 4 universes, which rules it out
+
*2012-04-29: Work continuing on [[StrichLux/IO-DMX|IO-DMX]] module.
−
** MagicQ
+
*2012-04-24: Permission received!
−
*** Very complex and more geared toward theatre setups than VJ setups
+
*2012-04-23: Requested permission from NeonBunny to attach LEDs to the tower.
−
*** Supports up to 16 universes over Art-Net
+
*2012-04-22: Started putting together idea.
−
*** x86-only
 
−
*** Advanced features like sound-reactiveness or remote control require a very expensive license dongle
 
−
** Lightjams
 
−
*** x86/Windows-only
 
−
*** Supports up to 16 universes over Art-Net
 
−
*** Sound reactiveness, remote control, Wiimote control, and everything else is included for a low price
 
  
−
= Ideas/Plans =
+
= Outstanding Issues  =
−
* Main idea is to cover most of the scaffold tower in addressable LED strips, driven by multiple StrichLux modules
 
−
* Art-Net will be used between the controller and the [[StrichLux]] box
 
−
** Backup plan is to have a USB hub and one OpenDMX USB interface per universe, driving the StrichLux boxes via [[StrichLux/IO-DMX|IO-DMX]] input modules
 
−
** [[StrichLux/IO-DMX|IO-DMX]] input module could be brought along either way and swapped to manually control the "display"
 
−
* Fit-PC 2i is being looked at to control the whole thing
 
−
** As nice as ARM would be power-wise, x86 will be much more flexible software-wise
 
−
** Need to make sure it will be powerful enough before we order
 
−
* Need to find a fanless very low power 4 or 5 port Ethernet switch
 
−
** Allied Telesis AT-FS705LE V5 might work, it's rugged, low power (1.5-2.5W), and cheap
 
−
*** But it takes 7.5V which would be another regulator and is a potential point of failure that would bring the entire system down
 
−
** Alternative option is the GarrettCom S14H-Hi, it takes 8-15V in via screw terminals and is ruggedized, but $140 and draws 4W
 
−
** Best option may be the Sixnet SL-5ES-1, it's $100, rugged, takes 10-30VDC via screw terminals, and only draws 2W
 
  
−
= System Components =
+
*Software evaluation:
−
* Fit-PC 2i (controller)
+
**QLC
−
* 4-port fanless Ethernet switch
+
***Max of only 4 universes, which rules it out
−
* 3 [[StrichLux]] boxes (driver, each with:
+
**MagicQ
−
** 1x [[StrichLux/IO-ETH|IO-ETH]]
+
***Very complex and more geared toward theatre setups than VJ setups
−
** 4x [[StrichLux/IO-SPI|IO-SPI]]
+
***Supports up to 16 universes over Art-Net
−
* Many LED strips '''(need to work out dimensions)'''
+
***x86-only
−
* Power setup '''(need to work out power details)'''
+
***Advanced features like sound-reactiveness or remote control require a very expensive license dongle
−
* Debugging terminal (XO-1?)
+
**Lightjams
 +
***x86/Windows-only
 +
***Supports up to 16 universes over Art-Net
 +
***Sound reactiveness, remote control, Wiimote control, and everything else is included for a low price
  
−
= Power Details =
+
= Ideas/Plans  =
−
* Power requirements (peak)
 
−
** Fit-PC 2i - ???
 
−
** Ethernet Switch - ???
 
−
** StrichLux box(es) - ???
 
−
** LEDs - 10W/m (~1.8A/m at 5V measured, so 10W/m after losses is reasonable)
 
  
−
= Power Architecture =
+
*Main idea is to cover most of the scaffold tower in addressable LED strips, driven by multiple StrichLux modules
−
<pre>
+
*Art-Net will be used between the controller and the [[StrichLux]] box
−
http://www.asciiflow.com/#4007824742034929919/13747898[YOB-2]
+
**Backup plan is to have a USB hub and one OpenDMX USB interface per universe, driving the StrichLux boxes via [[StrichLux/IO-DMX|IO-DMX]] input modules
 +
**[[StrichLux/IO-DMX|IO-DMX]] input module could be brought along either way and swapped to manually control the "display"
 +
*Fit-PC 2i is being looked at to control the whole thing
 +
**As nice as ARM would be power-wise, x86 will be much more flexible software-wise
 +
**Need to make sure it will be powerful enough before we order
 +
*Need to find a fanless very low power 4 or 5 port Ethernet switch
 +
**Allied Telesis AT-FS705LE V5 might work, it's rugged, low power (1.5-2.5W), and cheap
 +
***But it takes 7.5V which would be another regulator and is a potential point of failure that would bring the entire system down
 +
**Alternative option is the GarrettCom S14H-Hi, it takes 8-15V in via screw terminals and is ruggedized, but $140 and draws 4W
 +
**Best option may be the Sixnet SL-5ES-1, it's $100, rugged, takes 10-30VDC via screw terminals, and only draws 2W
 +
 
 +
= System Components  =
 +
 
 +
*Fit-PC 2i (controller)
 +
*4-port fanless Ethernet switch
 +
*3 [[StrichLux]] boxes (driver, each with:
 +
**1x [[StrichLux/IO-ETH|IO-ETH]]
 +
**4x [[StrichLux/IO-SPI|IO-SPI]]
 +
*Many LED strips '''(need to work out dimensions)'''
 +
*Power setup '''(need to work out power details)'''
 +
*Debugging terminal (XO-1?)
 +
 
 +
= Power Details  =
 +
 
 +
*Power requirements (peak)
 +
**Fit-PC 2i -&nbsp;???
 +
**Ethernet Switch -&nbsp;???
 +
**StrichLux box(es) -&nbsp;???
 +
**LEDs - 10W/m (~1.8A/m at 5V measured, so 10W/m after losses is reasonable)
 +
 
 +
= Power Architecture =
 +
<pre>http://www.asciiflow.com/#4007824742034929919/13747898[YOB-2]
 
                                                                               +--------------+
 
                                                                               +--------------+
−
                                                                         +--->| LED Strip  0 |
+
                                                                         +---&gt;| LED Strip  0 |
 
                                                                         |    +--------------+
 
                                                                         |    +--------------+
 
                                                                         |
 
                                                                         |
 
                                                                         |    +--------------+
 
                                                                         |    +--------------+
−
                                                       +---------------+ | +->| LED Strip  1 |
+
                                                       +---------------+ | +-&gt;| LED Strip  1 |
 
                                 +--------------+      |              +-+ |  +--------------+
 
                                 +--------------+      |              +-+ |  +--------------+
 
                                 |              |      |  StrichLux  +---+
 
                                 |              |      |  StrichLux  +---+
−
                                 |    Dome    |    +->| Controller A  +---+  +--------------+
+
                                 |    Dome    |    +-&gt;| Controller A  +---+  +--------------+
−
                                 |  Lighting  |    |  |              +-+ +->| LED Strip  2 |
+
                                 |  Lighting  |    |  |              +-+ +-&gt;| LED Strip  2 |
 
                                 |              |    |  +---------------+ |    +--------------+
 
                                 |              |    |  +---------------+ |    +--------------+
 
                                 +--------------+    |                    |
 
                                 +--------------+    |                    |
 
                                         ^          |                    |    +--------------+
 
                                         ^          |                    |    +--------------+
−
                                         |          |                    +--->| LED Strip  3 |
+
                                         |          |                    +---&gt;| LED Strip  3 |
 
                             +----------+---------+ |                        +--------------+
 
                             +----------+---------+ |                        +--------------+
 
                             |                    | |
 
                             |                    | |
 
                             |                    | |                        +--------------+
 
                             |                    | |                        +--------------+
−
                             |                    +-+                    +--->| LED Strip  4 |
+
                             |                    +-+                    +---&gt;| LED Strip  4 |
 
                             |                    |                      |    +--------------+
 
                             |                    |                      |    +--------------+
 
                             |                    |                      |
 
                             |                    |                      |
 
                             |                    |                      |    +--------------+
 
                             |                    |                      |    +--------------+
−
                             |                    |    +---------------+ | +->| LED Strip  5 |
+
                             |                    |    +---------------+ | +-&gt;| LED Strip  5 |
 
     +---------------+        |                    |    |              +-+ |  +--------------+
 
     +---------------+        |                    |    |              +-+ |  +--------------+
 
     |              |        |    Distribution    |    |  StrichLux  +---+
 
     |              |        |    Distribution    |    |  StrichLux  +---+
−
     |    Battery    +=======>|                    +--->| Controller B  +---+  +--------------+
+
     |    Battery    +=======&gt;|                    +---&gt;| Controller B  +---+  +--------------+
−
     |              |        |        Box        |    |              +-+ +->| LED Strip  6 |
+
     |              |        |        Box        |    |              +-+ +-&gt;| LED Strip  6 |
 
     +---------------+        |                    |    +---------------+ |    +--------------+
 
     +---------------+        |                    |    +---------------+ |    +--------------+
 
                             |                    |                      |
 
                             |                    |                      |
 
                             |                    |                      |    +--------------+
 
                             |                    |                      |    +--------------+
−
                             |                    |                      +--->| LED Strip  7 |
+
                             |                    |                      +---&gt;| LED Strip  7 |
 
                             |                    |                          +--------------+
 
                             |                    |                          +--------------+
 
                             |                    +-+
 
                             |                    +-+
 
                             |                    | |                        +--------------+
 
                             |                    | |                        +--------------+
−
                             +--+-------+---------+ |                    +--->| LED Strip  8 |
+
                             +--+-------+---------+ |                    +---&gt;| LED Strip  8 |
 
                                 |      |          |                    |    +--------------+
 
                                 |      |          |                    |    +--------------+
 
                       +---------+      |          |                    |
 
                       +---------+      |          |                    |
 
                       v                v          |                    |    +--------------+
 
                       v                v          |                    |    +--------------+
−
               +--------------+  +--------------+  |  +---------------+ | +->| LED Strip  9 |
+
               +--------------+  +--------------+  |  +---------------+ | +-&gt;| LED Strip  9 |
 
               |              |  |              |  |  |              +-+ |  +--------------+
 
               |              |  |              |  |  |              +-+ |  +--------------+
 
               | Convienience |  |    System    |  |  |  StrichLux  +---+
 
               | Convienience |  |    System    |  |  |  StrichLux  +---+
−
               |  Outlets    |  |  Controller  |  +->| Controller C  +---+  +--------------+
+
               |  Outlets    |  |  Controller  |  +-&gt;| Controller C  +---+  +--------------+
−
               |              |  |              |      |              |  +->| LED Strip 10 |
+
               |              |  |              |      |              |  +-&gt;| LED Strip 10 |
 
               +--------------+  +--------------+      +---------------+      +--------------+
 
               +--------------+  +--------------+      +---------------+      +--------------+
−
</pre>
+
</pre>  
 +
= LED Details (out of date, being replaced with below section)  =
  
−
= LED Details (out of date, being replaced with below section) =
+
*Length required (very out of date, need to update w/ numbers from Skibit)  
−
* Length required (very out of date, need to update w/ numbers from Skibit)
+
**Main vertical bars: 4 * 20ft = 80ft  
−
** Main vertical bars: 4 * 20ft = 80ft
+
**Ladder vertical bars: 10 * 3ft = 30ft (but 2 of those are near ground level)  
−
** Ladder vertical bars: 10 * 3ft = 30ft (but 2 of those are near ground level)
+
**Rigid guys: 4 * 6ft = 24ft  
−
** Rigid guys: 4 * 6ft = 24ft
+
**Ladder rungs: 8 * 4 * 1.5ft = 36ft  
−
** Ladder rungs: 8 * 4 * 1.5ft = 36ft
+
**'''Total: 170ft''' (plus probably want a bit extra just in case, so 11 strips or 180ft)  
−
** '''Total: 170ft''' (plus probably want a bit extra just in case, so 11 strips or 180ft)
+
**That's 1760 LEDs and 550W peak!
−
** That's 1760 LEDs and 550W peak!
 
  
−
== Lighting Layout ==
+
== Lighting Layout ==
−
=== Dimensions ===
+
 
−
<pre>
+
=== Dimensions ===
−
Main Module (2 of these vertically)
+
<pre>Main Module (2 of these vertically)
 
-----------------------------------
 
-----------------------------------
  
Line 143: Line 147:
 
A============B============A      A                                    A
 
A============B============A      A                                    A
 
|                        |      |                                    |
 
|                        |      |                                    |
−
</pre>
+
</pre>  
 +
*A - Module Height (5ft 1in)
 +
*B - Module Width (5ft)
 +
*C - Module Depth (7ft?)
 +
*D - Ladder Width (2.5ft?)
 +
*E - Beside-Ladder Width (B - D) (2.5ft?)
 +
*F - Cross-brace Length (7ft?)
 +
*G - Top Rail Support Height
 +
*H - Ladder Section Height (4ft?)
 +
*n - Number of Modules (3)
 +
*x - Number of Main Modules (2)
 +
 
 +
(note: F and C can't possibly be the same as they are now!)
 +
 
 +
=== Layout Proposal A  ===
 +
 
 +
*Vertical Mains: A * 4 * n = 5.083 * 4 * 3 = 61ft
 +
*Beside-Ladder Boxes: (E * 2 + H) * 2 * x = 36ft?
 +
*Cross-braces: F * 2 * 2 * x = 7 * 2 * 2 * 2 = 56ft?
 +
*Top Rail: B * 2 + C * 2 = 24ft?
 +
*Top-Middle Rail: C * 2 = 14ft?
 +
*Top Rail Supports: G * 2 = 3ft?
 +
*Toe Board (double strip): B * 4 = 20ft
 +
*'''Total: 214ft? / 65.2m?'''
 +
 
 +
=== Layout Proposal B  ===
 +
 
 +
*Vertical Mains: A * 4 * n = 5.083 * 4 * 3 = 61ft
 +
*Beside-Ladder Boxes: (E * 2 + H) * 2 * x = 36ft?
 +
*Cross-braces: F * 2 * 2 * x = 7 * 2 * 2 * 2 = 56ft?
 +
*Top Rail: B * 2 + C * 2 = 24ft?
 +
*Top-Middle Rail: C * 2 = 14ft?
 +
*Toe Board: B * 4 = 10ft
 +
*'''Total: 201ft? / 61.3m?'''
  
−
* A - Module Height (5ft 1in)
+
= StrichLux Enclosures  =
−
* B - Module Width (5ft)
 
−
* C - Module Depth (7ft?)
 
−
* D - Ladder Width (2.5ft?)
 
−
* E - Beside-Ladder Width (B - D) (2.5ft?)
 
−
* F - Cross-brace Length (7ft?)
 
−
* G - Top Rail Support Height
 
−
* H - Ladder Section Height (4ft?)
 
−
* n - Number of Modules (3)
 
−
* x - Number of Main Modules (2)
 
−
(note: F and C can't possibly be the same as they are now!)
 
  
−
=== Layout Proposal A ===
+
*Each StrichLux controller with its 4 output modules, 1 input module, and 1 power module will need an enclosure of some kind.  
−
* Vertical Mains: A * 4 * n = 5.083 * 4 * 3 = 61ft
+
**Pelican case? Could do one larger one with all 3 controllers in it, or 3 smaller ones
−
* Beside-Ladder Boxes: (E * 2 + H) * 2 * x = 36ft?
+
**Assuming each StrichLux box has its own enclosure, would need a bunch of connections made through it:  
−
* Cross-braces: F * 2 * 2 * x = 7 * 2 * 2 * 2 = 56ft?
+
***Power - 2x12V @ 20A each - 4 20A power pins
−
* Top Rail: B * 2 + C * 2 = 24ft?
+
***Ethernet input - RJ45 - 1 RJ45
−
* Top-Middle Rail: C * 2 = 14ft?
+
****Connec has plastic bayonet-style IP67 industrial Ethernet connectors which are somewhat reasonably priced, so far this looks like the best option even though it is a lot more expensive than regular non-weatherproof Ethernet
−
* Top Rail Supports: G * 2 = 3ft?
+
***Strip outputs - SPI+5V - 2 signal pins, 2 10A power pins each x 4
−
* Toe Board (double strip): B * 4 = 20ft
+
****JAE SRCN2A16-7S / SRCN6A16-7P would be good and extremely rugged, but the cost may be too high
−
* '''Total: 214ft? / 65.2m?'''
+
*Need inter-strip connectors too
 +
**Molex MX150 or Amphenol ATP connectors look good, sealed high-current automotive connectors that aren't too expensive
  
−
=== Layout Proposal B ===
+
= Test Equipment  =
−
* Vertical Mains: A * 4 * n = 5.083 * 4 * 3 = 61ft
 
−
* Beside-Ladder Boxes: (E * 2 + H) * 2 * x = 36ft?
 
−
* Cross-braces: F * 2 * 2 * x = 7 * 2 * 2 * 2 = 56ft?
 
−
* Top Rail: B * 2 + C * 2 = 24ft?
 
−
* Top-Middle Rail: C * 2 = 14ft?
 
−
* Toe Board: B * 4 = 10ft
 
−
* '''Total: 201ft? / 61.3m?'''
 
  
−
= StrichLux Enclosures =
+
*Want to be able to power the whole setup from AC power for configuration/testing/programming
−
* Each StrichLux controller with its 4 output modules, 1 input module, and 1 power module will need an enclosure of some kind.
+
**ATX power supplies provide plenty of +12V which could feed the [[StrichLux/PWR-DC5|PWR-DC5]] modules  
−
** Pelican case?  Could do one larger one with all 3 controllers in it, or 3 smaller ones
+
***A modular supply like the OCX ZT-series would be cleanest, could modify the cables with Sabre connectors on the ends
−
** Assuming each StrichLux box has its own enclosure, would need a bunch of connections made through it:
+
***Need 100W per channel, 200W per board, 600W total @ 12V
−
*** Power - 2x12V @ 20A each - 4 20A power pins
+
***100W per channel @ 12V means 8.33A
−
*** Ethernet input - RJ45 - 1 RJ45
+
***PCI-E and 8-pin CPU power connectors on ATX PSUs provide 6 amps per pin
−
**** Connec has plastic bayonet-style IP67 industrial Ethernet connectors which are somewhat reasonably priced, so far this looks like the best option even though it is a lot more expensive than regular non-weatherproof Ethernet
+
****PCI-E connectors have 3 pin pairs each
−
*** Strip outputs - SPI+5V - 2 signal pins, 2 10A power pins each x 4
+
****8-pin CPU power connectors have 4 pin pairs each
−
**** JAE SRCN2A16-7S / SRCN6A16-7P would be good and extremely rugged, but the cost may be too high
+
***Need four pins per board
−
* Need inter-strip connectors too
+
****Two boards get 8-pin CPU power -&gt; Sabre connectors
−
** Molex MX150 or Amphenol ATP connectors look good, sealed high-current automotive connectors that aren't too expensive
+
****The last board gets a 2xPCI-E power -&gt; Sabre connector
 +
***OCZ ZT-series 750W power supply has all the required connectors
  
−
= Test Equipment =
+
= Cost =
−
* Want to be able to power the whole setup from AC power for configuration/testing/programming
+
{| class="wikitable sortable" border="1"
−
** ATX power supplies provide plenty of +12V which could feed the [[StrichLux/PWR-DC5|PWR-DC5]] modules
+
|-
−
*** A modular supply like the OCX ZT-series would be cleanest, could modify the cables with Sabre connectors on the ends
+
! Item
−
*** Need 100W per channel, 200W per board, 600W total @ 12V
+
! Status
−
*** 100W per channel @ 12V means 8.33A
+
! Cost
−
*** PCI-E and 8-pin CPU power connectors on ATX PSUs provide 6 amps per pin
+
|-
−
**** PCI-E connectors have 3 pin pairs each
+
| IO-DMX + IO-BO Rev. 1 PCBs
−
**** 8-pin CPU power connectors have 4 pin pairs each
+
| Obtained
−
*** Need four pins per board
+
| align=right | $40.69
−
**** Two boards get 8-pin CPU power -> Sabre connectors
+
|-
−
**** The last board gets a 2xPCI-E power -> Sabre connector
+
| IO-DMX + IO-BO Parts
−
*** OCZ ZT-series 750W power supply has all the required connectors
+
| Obtained
 +
| align=right | $18.31
 +
|-
 +
| IO-SPI Rev. 1 PCBs
 +
| Obtained
 +
| align=right | $49.65
 +
|-
 +
| CORE + IO-ETH + PWR-DC5 PCBs
 +
| Obtained
 +
| align=right | $454.66
 +
|-
 +
| CORE + IO-SPI + IO-ETH + PWR-DC5 Parts
 +
| Obtained
 +
| align=right | $184.40
 +
|-
 +
| Test LED Strip
 +
| Obtained
 +
| align=right | $25.00
 +
|-
 +
| OCZ ZT 750W Test PSU
 +
| Obtained
 +
| align=right | $107.34
 +
|-
 +
| 60m LPD8806 LED Strip
 +
| Future
 +
| align=right | $1320.00
 +
|-
 +
| Fit-PC 2i
 +
| Future
 +
| align=right | ~$350.00
 +
|-
 +
| Lightjams License
 +
| Future
 +
| align=right | $149.00
 +
|-
 +
| Ethernet Switch
 +
| Future
 +
| align=right | ~$100.00
 +
|-
 +
| 2 sets of StrichLux IO-CORE + IO-ETH + PWR-DC5 Parts
 +
| Future
 +
| align=right | ~$350.00
 +
|-
 +
| Enclosures
 +
| Future
 +
| ???
 +
|-
 +
| Enclosure Connectors
 +
| Future
 +
| ???
 +
|-
 +
| Inter-Strip Connectors
 +
| Future
 +
| ???
 +
|-
 +
| '''Total'''
 +
| '''Obtained'''
 +
| align=right | $880.05
 +
|-
 +
| '''Total'''
 +
| '''Future'''
 +
| align=right | ~$2269.00
 +
|-
 +
| '''Grand Total'''
 +
|
 +
| align=right | ~$3149.05
 +
|}
  
−
[[Category:Current Projects]]
+
[[Category:Current_Projects]]

Revision as of 13:01, 17 June 2012

Beacon4 will be the fourth incarnation of the flagpole beacon (after Beacon2 and Beacon3), for Burning Man 2012. This year the plan is to take a different approach, and light the entire scaffold tower rather than just a beacon on top of the flagpole.

Project Status

  • 2012-06-07: Work on StrichLux continues. Evaluated lots of software, Lightjams is looking the best at this point, though would require Windows.
  • 2012-05-27: Completed rev. 1 StrichLux system design of all modules required for this project and sent all boards off for manufacturing.
  • 2012-04-30: Started planning the power architecture for the project.
  • 2012-04-29: Work continuing on IO-DMX module.
  • 2012-04-24: Permission received!
  • 2012-04-23: Requested permission from NeonBunny to attach LEDs to the tower.
  • 2012-04-22: Started putting together idea.

Outstanding Issues

  • Software evaluation:
    • QLC
      • Max of only 4 universes, which rules it out
    • MagicQ
      • Very complex and more geared toward theatre setups than VJ setups
      • Supports up to 16 universes over Art-Net
      • x86-only
      • Advanced features like sound-reactiveness or remote control require a very expensive license dongle
    • Lightjams
      • x86/Windows-only
      • Supports up to 16 universes over Art-Net
      • Sound reactiveness, remote control, Wiimote control, and everything else is included for a low price

Ideas/Plans

  • Main idea is to cover most of the scaffold tower in addressable LED strips, driven by multiple StrichLux modules
  • Art-Net will be used between the controller and the StrichLux box
    • Backup plan is to have a USB hub and one OpenDMX USB interface per universe, driving the StrichLux boxes via IO-DMX input modules
    • IO-DMX input module could be brought along either way and swapped to manually control the "display"
  • Fit-PC 2i is being looked at to control the whole thing
    • As nice as ARM would be power-wise, x86 will be much more flexible software-wise
    • Need to make sure it will be powerful enough before we order
  • Need to find a fanless very low power 4 or 5 port Ethernet switch
    • Allied Telesis AT-FS705LE V5 might work, it's rugged, low power (1.5-2.5W), and cheap
      • But it takes 7.5V which would be another regulator and is a potential point of failure that would bring the entire system down
    • Alternative option is the GarrettCom S14H-Hi, it takes 8-15V in via screw terminals and is ruggedized, but $140 and draws 4W
    • Best option may be the Sixnet SL-5ES-1, it's $100, rugged, takes 10-30VDC via screw terminals, and only draws 2W

System Components

  • Fit-PC 2i (controller)
  • 4-port fanless Ethernet switch
  • 3 StrichLux boxes (driver, each with:
  • Many LED strips (need to work out dimensions)
  • Power setup (need to work out power details)
  • Debugging terminal (XO-1?)

Power Details

  • Power requirements (peak)
    • Fit-PC 2i - ???
    • Ethernet Switch - ???
    • StrichLux box(es) - ???
    • LEDs - 10W/m (~1.8A/m at 5V measured, so 10W/m after losses is reasonable)

Power Architecture

http://www.asciiflow.com/#4007824742034929919/13747898[YOB-2]
                                                                              +--------------+
                                                                         +--->| LED Strip  0 |
                                                                         |    +--------------+
                                                                         |
                                                                         |    +--------------+
                                                       +---------------+ | +->| LED Strip  1 |
                                +--------------+       |               +-+ |  +--------------+
                                |              |       |   StrichLux   +---+
                                |     Dome     |    +->| Controller A  +---+  +--------------+
                                |   Lighting   |    |  |               +-+ +->| LED Strip  2 |
                                |              |    |  +---------------+ |    +--------------+
                                +--------------+    |                    |
                                        ^           |                    |    +--------------+
                                        |           |                    +--->| LED Strip  3 |
                             +----------+---------+ |                         +--------------+
                             |                    | |
                             |                    | |                         +--------------+
                             |                    +-+                    +--->| LED Strip  4 |
                             |                    |                      |    +--------------+
                             |                    |                      |
                             |                    |                      |    +--------------+
                             |                    |    +---------------+ | +->| LED Strip  5 |
    +---------------+        |                    |    |               +-+ |  +--------------+
    |               |        |    Distribution    |    |   StrichLux   +---+
    |    Battery    +=======>|                    +--->| Controller B  +---+  +--------------+
    |               |        |        Box         |    |               +-+ +->| LED Strip  6 |
    +---------------+        |                    |    +---------------+ |    +--------------+
                             |                    |                      |
                             |                    |                      |    +--------------+
                             |                    |                      +--->| LED Strip  7 |
                             |                    |                           +--------------+
                             |                    +-+
                             |                    | |                         +--------------+
                             +--+-------+---------+ |                    +--->| LED Strip  8 |
                                |       |           |                    |    +--------------+
                      +---------+       |           |                    |
                      v                 v           |                    |    +--------------+
              +--------------+   +--------------+   |  +---------------+ | +->| LED Strip  9 |
              |              |   |              |   |  |               +-+ |  +--------------+
              | Convienience |   |    System    |   |  |   StrichLux   +---+
              |   Outlets    |   |  Controller  |   +->| Controller C  +---+  +--------------+
              |              |   |              |      |               |   +->| LED Strip 10 |
              +--------------+   +--------------+      +---------------+      +--------------+

LED Details (out of date, being replaced with below section)

  • Length required (very out of date, need to update w/ numbers from Skibit)
    • Main vertical bars: 4 * 20ft = 80ft
    • Ladder vertical bars: 10 * 3ft = 30ft (but 2 of those are near ground level)
    • Rigid guys: 4 * 6ft = 24ft
    • Ladder rungs: 8 * 4 * 1.5ft = 36ft
    • Total: 170ft (plus probably want a bit extra just in case, so 11 strips or 180ft)
    • That's 1760 LEDs and 550W peak!

Lighting Layout

Dimensions

Main Module (2 of these vertically)
-----------------------------------

+-----D-----+------E------+       |\                                   /|
|           |             |       |    \                           /    |
|-----D-----|             |       |        F                   /        |
|           H             |       |            \           /            |
|-----D-----|             |       |                \   /                |
|           |             |       |                /   \                |
|-----D-----+------E------|       |            /           \            |
|                         |       |        F                   \        |
A                         A       A    /                           \    A
|-----------B-------------+       |/                                   \|


Top Module
----------

|                         |       |                                     |
|                         |       |                                     |
|                         |       |                                     |
|                         |       |                                     |
|-------B-----------------|       |------------------C------------------|
|            |            |       |  /                               \  |
|            G            |       |------------------C------------------|
|            |            |       |                                     |
A============B============A       A                                     A
|                         |       |                                     |
  • A - Module Height (5ft 1in)
  • B - Module Width (5ft)
  • C - Module Depth (7ft?)
  • D - Ladder Width (2.5ft?)
  • E - Beside-Ladder Width (B - D) (2.5ft?)
  • F - Cross-brace Length (7ft?)
  • G - Top Rail Support Height
  • H - Ladder Section Height (4ft?)
  • n - Number of Modules (3)
  • x - Number of Main Modules (2)

(note: F and C can't possibly be the same as they are now!)

Layout Proposal A

  • Vertical Mains: A * 4 * n = 5.083 * 4 * 3 = 61ft
  • Beside-Ladder Boxes: (E * 2 + H) * 2 * x = 36ft?
  • Cross-braces: F * 2 * 2 * x = 7 * 2 * 2 * 2 = 56ft?
  • Top Rail: B * 2 + C * 2 = 24ft?
  • Top-Middle Rail: C * 2 = 14ft?
  • Top Rail Supports: G * 2 = 3ft?
  • Toe Board (double strip): B * 4 = 20ft
  • Total: 214ft? / 65.2m?

Layout Proposal B

  • Vertical Mains: A * 4 * n = 5.083 * 4 * 3 = 61ft
  • Beside-Ladder Boxes: (E * 2 + H) * 2 * x = 36ft?
  • Cross-braces: F * 2 * 2 * x = 7 * 2 * 2 * 2 = 56ft?
  • Top Rail: B * 2 + C * 2 = 24ft?
  • Top-Middle Rail: C * 2 = 14ft?
  • Toe Board: B * 4 = 10ft
  • Total: 201ft? / 61.3m?

StrichLux Enclosures

  • Each StrichLux controller with its 4 output modules, 1 input module, and 1 power module will need an enclosure of some kind.
    • Pelican case? Could do one larger one with all 3 controllers in it, or 3 smaller ones
    • Assuming each StrichLux box has its own enclosure, would need a bunch of connections made through it:
      • Power - 2x12V @ 20A each - 4 20A power pins
      • Ethernet input - RJ45 - 1 RJ45
        • Connec has plastic bayonet-style IP67 industrial Ethernet connectors which are somewhat reasonably priced, so far this looks like the best option even though it is a lot more expensive than regular non-weatherproof Ethernet
      • Strip outputs - SPI+5V - 2 signal pins, 2 10A power pins each x 4
        • JAE SRCN2A16-7S / SRCN6A16-7P would be good and extremely rugged, but the cost may be too high
  • Need inter-strip connectors too
    • Molex MX150 or Amphenol ATP connectors look good, sealed high-current automotive connectors that aren't too expensive

Test Equipment

  • Want to be able to power the whole setup from AC power for configuration/testing/programming
    • ATX power supplies provide plenty of +12V which could feed the PWR-DC5 modules
      • A modular supply like the OCX ZT-series would be cleanest, could modify the cables with Sabre connectors on the ends
      • Need 100W per channel, 200W per board, 600W total @ 12V
      • 100W per channel @ 12V means 8.33A
      • PCI-E and 8-pin CPU power connectors on ATX PSUs provide 6 amps per pin
        • PCI-E connectors have 3 pin pairs each
        • 8-pin CPU power connectors have 4 pin pairs each
      • Need four pins per board
        • Two boards get 8-pin CPU power -> Sabre connectors
        • The last board gets a 2xPCI-E power -> Sabre connector
      • OCZ ZT-series 750W power supply has all the required connectors

Cost

Item Status Cost
IO-DMX + IO-BO Rev. 1 PCBs Obtained $40.69
IO-DMX + IO-BO Parts Obtained $18.31
IO-SPI Rev. 1 PCBs Obtained $49.65
CORE + IO-ETH + PWR-DC5 PCBs Obtained $454.66
CORE + IO-SPI + IO-ETH + PWR-DC5 Parts Obtained $184.40
Test LED Strip Obtained $25.00
OCZ ZT 750W Test PSU Obtained $107.34
60m LPD8806 LED Strip Future $1320.00
Fit-PC 2i Future ~$350.00
Lightjams License Future $149.00
Ethernet Switch Future ~$100.00
2 sets of StrichLux IO-CORE + IO-ETH + PWR-DC5 Parts Future ~$350.00
Enclosures Future ???
Enclosure Connectors Future ???
Inter-Strip Connectors Future ???
Total Obtained $880.05
Total Future ~$2269.00
Grand Total ~$3149.05
Retrieved from "http://hackstrich.sen.cx/wiki/index.php?title=Beacon4&oldid=1426"