BlinkieBits

BlinkieBits will be a series of small boards with microcontrollers on some and LEDs on others. The boards will interconnect to make blinkies, and will talk to each other to make larger blinkie displays.

Topology

Current idea is to have a 'base layer' of interface board(s) and processor board(s), and then a layer on top of display boards. Each display board would plug into one (or more?) processor board using standard connections so that any display board could plug into any processor board (channel requirements notwithstanding).

Interface Board Ideas

• USB
• RS232
• Ethernet
• SPI/I2C/TWI/1Wire

Processor Board Ideas

• Umm... processors and stuff.

Display Board Ideas

All ideas based on 12 channels per display board, as a random example.

• 1x16 Single-Color
• 1x5 RGB
• 4x4 Single-Color

Architecture/Project Ideas

• Standard number of channels per display/processor board, or variable?
  • If variable, could two 12-channel processor boards (for example) connect to one 24-channel-requiring display board?
• Would boards interconnect in 1d space only, or also in 2d space?
• Could boards program each other like the IXM boards can?
  • No reason not, if the MCUs supported self-programming and a standard bootloader was used. Very small MCUs likely won't support the former though, so a hack would need to be done with extra pins to program each other.