Difference between revisions of "Huxley"
From Hackstrich
(Huxley!) |
(No difference)
|
Revision as of 03:05, 5 December 2011
I'm building a RepRap Huxley, printing parts on the HackLab's Makerbot.
Components
- Extruder: Universal Mini Extruder modified for bowden cable
- Hot End: ?
- Electronics: Sanguinololu
Status
- 2011-12-04: Printed all components for the extruder other than the fixed block. The duct-1 component failed 95% through the print, I think it should be okay as-is, but if not a separate extension piece could be added. Decided on Sanguinololu electronics, ordered 1x NEMA11 stepper, 3x NEMA14 steppers, and Pololu stepper drivers from Pololu. Still need to order Sanguinololu itself.
