StrichLux/IO-ETH

From Hackstrich
Revision as of 15:42, 1 May 2012 by SarahEmm (talk | contribs) (Status change.)

The StrichLux IO-ArtNet module will provide 1-4 universes of input or output via Art-Net. This module can "take over" adjacent channels if configured to, so that only one module is needed for a complete StrichLux system.

Project Status

  • 2012-04-24: Started initial planning.

Specs

  • Based around the PIC32MX664F128H microcontroller as there is no economical way to do Ethernet on FPGAs for low-cost designs
  • This micro has no EEPROM (?!) so will need external I2C EEPROM for storing config data
  • Also needs external PHY
    • LAN8700C is supported and < $3, seems a good choice
Retrieved from "http://hackstrich.sen.cx/wiki/index.php?title=StrichLux/IO-ETH&oldid=1343"