ECLair
From Hackstrich
ECLair is a long-term project to build an ECL minicomputer.
Project Status
- 2012-12-04: Started the logical diagram and the microcode layout.
- 2012-12-01/02: Spent the weekend reading Bit-Slice Microprocessor Design.
- 2012-11-24: Basic ideas/architecture starting to get put together.
Architecture Overview
- MECL-based
- 25MHz main clock
- 8-bit data width
- 24-bit physical address, 16-bit virtual address
- DMA support (at least for front panel, maybe one other DMA channel?)
- Microcoded, running control store in SRAM for speed
- Unless I can find equally-fast EPROMs
- Copied to SRAM from EPROM before the system starts
Microcode Layout
| Bit # | Width | Function | Details |
|---|---|---|---|
| 0 | 1 | MC Addr Source | low = microcode bits, high = IR |
| 1 | 1 | Jump MC Addr | Microcode sequencer load |
| 2-10 | 8 | MC Jump Address | Used if bit 0 = low |
| 11 | 1 | MDR Source | low = data bus, high = Z |
| 12 | 1 | MDR Load | MDR latch load |
| 13 | 1 | MAR Load | MAR latch load from Z |
| 14 | 1 | IR Load | IR latch load from data bus |
| 15 | 1 | PC Increment | Increment PC by 1 |
| 16 | 1 | PC Load | PC counter load from Z |
| 17-19 | 3 | Register Load from Z | 000 - None 001 - A 010 - B 011 - C 100 - D 101 - SP |
