BrailleNote Tieman Display

• Display uses 1 "backplane board" per 8 cells
• Each backplane board has 8 cell connectors, 2 inter-board connectors (left and right), and one Supertex HV507PG chip
  • The HV507PG is a high-voltage 64 channel shift register
• Pinout of display connector (from edge of board opposite SMD cap)
  • Left Side (male)
    • Red - HV
    • Grey - Ground
    • Grey - Data B
    • Grey - Straight through to right side
    • Green - CLK
    • Grey - !LatchEnable
    • Grey - LV
    • Grey - Direction (Low = A in, B out)
  • Right Side (female)
    • Red - HV
    • Grey - Ground
    • Grey - Data A
    • Grey - Straight through to left side
    • Green - CLK
    • Grey - !LatchEnable
    • Grey - LV
    • Grey - Direction (Low = A in, B out)
  • Data pin is connected to straight-through pin on the last backplane board, which lets the BN read the bits back to ensure the display is working