Difference between revisions of "LaserBox/Pinouts"

From Hackstrich
(Pinouts all done, for now.)
Line 49: Line 49:
 
# SDA
 
# SDA
  
== Liquid Sensor Connector (2x2) ==
+
== Liquid Sensor Connector (2x2, to be ordered) ==
 
# Ref A
 
# Ref A
 
# Ref B
 
# Ref B
Line 55: Line 55:
 
# Sense B
 
# Sense B
  
== PIR Motion Sensor (2x2, to be ordered) ==
+
== PIR Motion Sensor (2x2) ==
 
# +5V
 
# +5V
 
# '''KEY'''
 
# '''KEY'''

Revision as of 22:32, 6 April 2017

This page documents the pinouts for connectors used in the LaserBox project.

Orientation

  • Two-row rectangular pin headers are numbered from upper right pin to lower left pin, when the tab/slot is facing up
9  7  5  3  1
▁▁▁▅▅▁▁▁
•  •  •  •  • 

•  •  •  •  •
▔▔▔▔▔▔▔▔ 
10 8  6  4  2


Mux Data Connector (2x5)

  1. Data In
  2. +5V
  3. Data Out
  4. +5V
  5. GND
  6. +5V
  7. GND
  8. Clock
  9. GND
  10. Latch

Mux Laser Connector (2x7)

  1. Output 0
  2. GND
  3. Output 1
  4. GND
  5. Output 2
  6. GND
  7. Output 3
  8. GND
  9. Output 4
  10. GND
  11. Output 5
  12. GND
  13. +5V
  14. GND

Gesture Sensor Connector (2x3)

  1. +5V
  2. GND
  3. +3.3V
  4. INT
  5. SCL
  6. SDA

Liquid Sensor Connector (2x2, to be ordered)

  1. Ref A
  2. Ref B
  3. Sense A
  4. Sense B

PIR Motion Sensor (2x2)

  1. +5V
  2. KEY
  3. GND
  4. Sense

Fan Control Connector (2x4)

  1. Fan A +V_FAN
  2. Fan A GND
  3. Fan B +V_FAN
  4. Fan B GND
  5. Fan C +V_FAN
  6. Fan C GND
  7. N/C
  8. KEY

Fogger Connector (2x4)

  1. +5V
  2. GND
  3. KEY
  4. N/C
  5. Fog On Output
  6. GND
  7. GND
  8. Fog Current Input