Difference between revisions of "StrichLux/PWR-DC5"

From Hackstrich
(Status update.)
(Status update.)
Line 2: Line 2:
  
 
== Project Status ==
 
== Project Status ==
* 2012-05-22: Completed schematic, initial component placement on PCB done.
+
* 2012-05-22: Routing about half done.
 +
* 2012-05-21: Completed schematic, initial component placement on PCB done.
 
* 2012-05-20: Put BOM together.
 
* 2012-05-20: Put BOM together.
 
* 2012-05-01: Started initial design.
 
* 2012-05-01: Started initial design.

Revision as of 04:40, 23 May 2012

The StrichLux PWR-DC5 module will take a DC input (5 or 12V) and output 5VDC @ 20A out on each high-power bus (total of 40A/200W).

Project Status

  • 2012-05-22: Routing about half done.
  • 2012-05-21: Completed schematic, initial component placement on PCB done.
  • 2012-05-20: Put BOM together.
  • 2012-05-01: Started initial design.

Specs

  • At least 4.5-13.8V input (will depend on the DC-DCs used)
  • 200W / 20A output per bus
  • Most likely candidate for the DC-DC converters is the Lineage UVT020A0X3-SRZ