Difference between revisions of "StrichSwitcher"
From Hackstrich
(Digikey parts waiting for.) |
|||
| Line 2: | Line 2: | ||
== Project Status == | == Project Status == | ||
| − | Schematic/board done, rev. 1 PCBs received from BatchPCB and parts received from Digikey. Initial order from Digikey shipped resistors instead of caps (330ohm instead of 330pF!), I didn't notice stuffing the board, and something let the magic smoke out (I think the main controller chip). Replacement chip | + | Schematic/board done, rev. 1 PCBs received from BatchPCB and parts received from Digikey. Initial order from Digikey shipped resistors instead of caps (330ohm instead of 330pF!), I didn't notice stuffing the board, and something let the magic smoke out (I think the main controller chip). Replacement chip and caps received from Digikey. |
== Design Overview/Ideas == | == Design Overview/Ideas == | ||
| Line 9: | Line 9: | ||
[[Category:Current Projects]] | [[Category:Current Projects]] | ||
| − | [[Category:Status/Waiting for | + | [[Category:Status/Waiting for Time]] |
Revision as of 04:30, 21 November 2010
strichSwitcher is a small integrated switching regulator, designed to take 2.8-7V (i.e. battery inputs from standard AA/C/D cells or LiIon/LiPoly cells) and output 5 or 3.3V.
Project Status
Schematic/board done, rev. 1 PCBs received from BatchPCB and parts received from Digikey. Initial order from Digikey shipped resistors instead of caps (330ohm instead of 330pF!), I didn't notice stuffing the board, and something let the magic smoke out (I think the main controller chip). Replacement chip and caps received from Digikey.
Design Overview/Ideas
- Based around the LTC3534 switching controller
- Buck/boost topology to support battery inputs
