Difference between revisions of "StrichSwitcher"

From Hackstrich
(Dormantizing again.)
Line 8: Line 8:
 
* Buck/boost topology to support battery inputs
 
* Buck/boost topology to support battery inputs
  
[[Category:Current Projects]]
+
[[Category:Dormant Projects]]
[[Category:Status/Waiting for Time]]
 

Revision as of 11:41, 5 January 2011

strichSwitcher is a small integrated switching regulator, designed to take 2.8-7V (i.e. battery inputs from standard AA/C/D cells or LiIon/LiPoly cells) and output 5 or 3.3V.

Project Status

Schematic/board done, rev. 1 PCBs received from BatchPCB and parts received from Digikey. Initial order from Digikey shipped resistors instead of caps (330ohm instead of 330pF!), I didn't notice stuffing the board, and something let the magic smoke out (I think the main controller chip). Replacement chip and caps received from Digikey.

Design Overview/Ideas

  • Based around the LTC3534 switching controller
  • Buck/boost topology to support battery inputs