StrichSwitcher

From Hackstrich
Revision as of 13:57, 14 November 2010 by SarahEmm (talk | contribs) (Digikey parts waiting for.)

strichSwitcher is a small integrated switching regulator, designed to take 2.8-7V (i.e. battery inputs from standard AA/C/D cells or LiIon/LiPoly cells) and output 5 or 3.3V.

Project Status

Schematic/board done, rev. 1 PCBs received from BatchPCB and parts received from Digikey. Initial order from Digikey shipped resistors instead of caps (330ohm instead of 330pF!), I didn't notice stuffing the board, and something let the magic smoke out (I think the main controller chip). Replacement chip is on order w/ Digikey.

Design Overview/Ideas

  • Based around the LTC3534 switching controller
  • Buck/boost topology to support battery inputs