Difference between revisions of "PoE Shield"
From Hackstrich
(Add notes and update status) |
|||
| Line 8: | Line 8: | ||
=== Notes from Rev 1. === | === Notes from Rev 1. === | ||
* For LM5070 library part put a notation for where pin 1 goes. | * For LM5070 library part put a notation for where pin 1 goes. | ||
| − | + | * C6 footprint does not match BoM (C6 should be 0603 or footprint to 0805) | |
[[Category:Current Projects]] | [[Category:Current Projects]] | ||
[[Category:Status/Waiting for Time]] | [[Category:Status/Waiting for Time]] | ||
Revision as of 19:42, 20 November 2010
The PoE shield will be compatible software-wise with the official Arduino Ethernet Shield, but also supply power to the board via Power over Ethernet.
Project Status
Design, BOM, schematic, and PCB layout complete, PCBs received from Laen and parts on order with Digikey.
Notes
Notes from Rev 1.
- For LM5070 library part put a notation for where pin 1 goes.
- C6 footprint does not match BoM (C6 should be 0603 or footprint to 0805)
