Difference between revisions of "Solder Paste Dispenser"
From Hackstrich
(Initial page for the solder paste dispenser project.) |
(No difference)
|
Revision as of 23:13, 18 October 2010
The Solder Paste Dispenser project's aim is to assemble a device that can be used to easily apply solder paste to boards using minimal manual effort.
Goals/Requirements
- Operate independently of a shop air source
- Dispense using a foot pedal or finger switch
- Have minimal parts so it can be stored in a small bin at the lab
System Plan
- Small (1/4 gallon) air tank, can charge using a schraeder valve from a tire pump
- EFD 2000XL dispenser controller
