Search results
From Hackstrich
Create the page "I" on this wiki! See also the search results found.
- ...sparkly. It'll be made of mostly off-the-shelf parts plugged together, as I have limited time to get it put together. ** Wireless I/O - LoRa Radio FeatherWing4 KB (598 words) - 17:30, 8 June 2024
- ...only target will be the [[PACmate20 Braille Display]] because that's what I use, and they're way too expensive to justify me getting more to port it), * 2015: I happily use a BrailleNote Apex now, so this project is kind of moot :) Canc2 KB (327 words) - 23:39, 26 March 2015
- ...een sold for some time, if I get around to building the integrated version I'll start it as a new project.5 KB (916 words) - 15:04, 1 March 2017
- ...nuity tester that's fast, tiny, and can attach to a board I'm reversing so I don't need full multimeter when reversing boards away from a desk. The hard * Clips or magnets to a board I'm working on to save having another thing to put somewhere.4 KB (685 words) - 17:38, 30 March 2018
- ...rollers]] on some (Processor Boards), LEDs on others (Display Boards), and I/O capabilities on others (Interface Boards). The boards will interconnect ...the [[BlinkieNICBoard]] is ongoing. Project dormant as of June 2010 while I work on other things.6 KB (933 words) - 03:28, 25 November 2012
- ...The last batch had extra-long leads it looks like, but this one does not. I'm going to have to do a Revision 4 of the PCB and eliminate the level shift * Fixed in revision 5: <s>RX-I and TX-O labels are backwards!</s>7 KB (1,111 words) - 20:47, 27 December 2011
- I'd like a series of clocks on my desk at work to show various timezones. The * 2018-03-07: Realized overnight that I never added the lack of a version resistor to the list of issues for Rev00112 KB (2,000 words) - 02:07, 12 January 2019
- Project Dandelion is the restoration of a Xerox Star 8010 (Dandelion) machine I have into working condition. '''This page is mostly out of date and not maintained as I figure out what to keep here.'''3 KB (416 words) - 02:44, 14 June 2015
- ...ed/documented. Took photos of all wire routing (not yet uploaded) so that I can hopefully re-route it the same once it goes back in.962 bytes (142 words) - 01:02, 24 May 2015
- ...call this completed after all, decided against offering it as a product as I don't think there's a big enough market there. All working though, and the ...tting into dormant status, as I won't have time until after Burning Man as I'm putting all my time into [[Beacon4]].2 KB (389 words) - 14:15, 2 June 2013
- * Boards will communicate via I<sup>2</sup>C. ** R<sub>SENSE</sub> = 0.1 / I<sub>CHG(MAX)</sub> (Ω) ∴ '''R<sub>SENSE</sub> = 0.1 / 0.310 = 0.3225ohms8 KB (1,359 words) - 19:00, 11 August 2011
- ** Also I haven't used PICs in any projects in ~5 years, so I want to try them out again :)2 KB (264 words) - 12:55, 14 March 2012
- ...itcher is a small integrated switching regulator, designed to take 2.8-7V (i.e. battery inputs from standard AA/C/D cells or LiIon/LiPoly cells) and out ...I didn't notice stuffing the board, and something let the magic smoke out (I think the main controller chip). Replacement chip and caps received from D694 bytes (103 words) - 00:34, 23 January 2012
- * Add a green wire from the 3rd pin down on the left I/O connector to the last resistor in the first bank under the MCU * Add a green wire from the 4th pin down on the left I/O connector to the first resistor pad in the second bank under the MCU2 KB (292 words) - 13:00, 19 July 2011
- * Are source/sink-only I/O connectors provided with the correct companion voltages?4 KB (618 words) - 18:05, 30 September 2023
- * '''Concept 1''' - DVI/VGA - Hard MCU for I/O, CPLD for high speed graphics output *** Will need a lot of I/O pins3 KB (584 words) - 19:05, 4 April 2011
- * Fixed in revision 2: <s>Feedback resistors R16/R17 are backwards (i think), need to flip them/retest</s> - Flipped, correctly limits to 11.8V w ** I(CF) = Vr15 KB (2,569 words) - 04:57, 26 December 2012
- ...onnected. Need to bring syringes and misc. parts I have at home next time I'm at the lab to finish this! * 2011-10-08: Norman has put the new air connector on. I have put a temporary plug into the vacuum connector and tested the unit, it2 KB (303 words) - 19:19, 10 November 2013
- ...on the TFT, no progress. Eric has ordered the ADC, DAC, and TFT connector I need. ...Eric to add a A100226CT-ND to his next order, BOM is not updated yet until I verify the new part fits/works.7 KB (1,143 words) - 16:57, 29 January 2012
- ** 20x2 LCD screen for feedback and because I like LCD screens * Redesigned front panel for the ProxPro HID reader that I had laying around3 KB (550 words) - 15:05, 1 March 2017
